ZOLL AutoPulse Rev D Users Guide - Manual (Page 15)

P/N 11440-001 Rev. 3 Page 1-3
User Guide
Figure 1-2 AutoPulse Platform (Patient and Back Surfaces)
1.3.2 LifeBand Load-distributing Band (LDB)
The LifeBand is a load-distributing band (LDB) that consists of a cover plate and two bands integrated
with a compression pad with a Velcro
®
fastener. Attached to the AutoPulse Platform, the LifeBand is
automatically adjusted to the patient and provides compressions to the patient's chest in the region of the
heart. The latex-free LifeBand is a single-use component that is attached to the AutoPulse Platform
before each use.
1.3.3 AutoPulse Power System Battery
The AutoPulse Battery is a removable component that supplies power for the AutoPulse operation. The
Battery is a proprietary, rechargeable, nickel-metal hydride (NiMH) battery that is the exclusive power
source for the AutoPulse.
The Battery is mechanically keyed to the AutoPulse Platform and Battery Charger to facilitate correct
installation. The Battery’s back end contains connections for power and communications to the Battery
Charger and to the AutoPulse Platform. A Battery Status Check button illuminates the Battery’s status
light-emitting diodes (LEDs).
For more information on the Battery, refer to the AutoPulse Power System User Guide .
Cooling Vent
Cooling Vent
LifeBand ®
Roller Guide
AutoPulse
Slotted Drive Shaft
Battery
ON/OFF Button
User Control Panel
Start/Continue Button
Stop/Cancel Button
Carry Handle Patient Alignment
Reference
Patient Surface
Back Surface