Category, Specifications – ZOLL AutoPulse Rev A User Manual

Page 45

P/N. 12457-001 Rev. 2

Page C-3

Power System User Guide

C.3

Multi-Chemistry Battery Charger Physical And

Environmental

Free fall

Meets IEC 60068-2-31 Basic Environmental Testing Procedures – Free Fall –
Procedure 1.

Electrostatic discharge

Meets IEC 61000-4-2, Level 3

Radiated emissions

Meets CISPR 11/EN55011, Group 1, Class A
FCC part 15, Class A

Table C-3 Multi-Chemistry Battery Charger Specifications (Page 1 of 2)

Category

Specifications

Manufacturer

Manufactured for ZOLL Circulation

Model Number

8700-0753-01

Size (L

WH)

16.01 in. by 9.50 in. by 6.54 in. (40.6 cm by 24.1 cm by 16.6 cm).

Weight

7.1 lbs. (3.23 kg)

Operating input voltage

100 to 240V AC

Operating input frequency

50/60 Hz

Input current

2.0 Amps (maximum)

Maximum Battery charge
time

Less than 6¼ hours (at 77ºF [25ºC])

Fuses

User-replaceable, T2.5A 250V AC (2 required)

Operating temperature

+41º to +95ºF (5º to +35ºC) (68º to 77ºF [20º to 25ºC] preferred)

Storage temperature

-40º to +158ºF (-40º to +70ºC)

Relative humidity

5% to 95%, non-condensing.

Operating altitude

0 to 10,000 ft. (0 to 3,048 m)

Enclosure protection

Meets IP22 per IEC 60529

Shock

Meets IEC 60068-2-27 Basic Environmental Testing Procedures – Shock (50g,
11ms pulse, half sine wave)

Vibration

Meets IEC 60068-2-6 Basic Environmental Testing Procedures (10 to 150 Hz,
10 m/s

)

Meets IEC 60068-2-64 Basic Environmental Testing Procedures – Random
Vibration Broad Band – General Requirements (f1:20, f2:2000, ASD 0.05)