Warner Electric XPRO - Manual (Page 8)

8 Warner Electric • +33 (0) 2 41 21 24 24 P-2099-WE-A4
4. Set up Setpoint screen
This screen allows you to display and to change the current value of the setpoint. There are actually two ways to
change it.
5. Manual screen
This screen is displaying in real time the value of both XCTRL outputs with offering the possibility to force the
value.
After having selected which setpoint you want to modify,
the first way to change the value is to use the up/down
arrows to increase/decrease it by one.
With pushing on the Manual button, you are entering the
forcing screen. The background of the screen is turned
Red.
With pressing on Out1/2, one selects the output which
needs to be modified.
Like with the Setpoint setting, with pushing on the arrows
you can increase or decrease the output value.
With pushing on the value itself, the below screen is
popped up to allow you to enter directly the correct value.
The second way is to push the blinking value. It will then
display a new screen integrating a digital keyboard with
which you will be able to enter directly the required value.