Warner Electric AC10 Measuring System - Manual (Page 2)

2 Warner Electric • 800-825-9050 P-2012-2
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
System Overview. . . . . . . . . . . . . . . . . . . . . . . 3
AC10 Tensioncells . . . . . . . . . . . . . . . . . . . . . . 4
AC10 Electronics . . . . . . . . . . . . . . . . . . . . . . . 5
AC10 Specifications . . . . . . . . . . . . . . . . . . . . 6
Pushbutton Key Functions . . . . . . . . . . . . . . . 7
Installation
Pre-Installation Inspection . . . . . . . . . . . . . . . . 8
Mechanical Installation . . . . . . . . . . . . . . . . . . 8
Electrical Installation . . . . . . . . . . . . . . . . . . . 10
Electrical Connections. . . . . . . . . . . . . . . . . . 10
Initial Electrical Checks . . . . . . . . . . . . . . . . . 12
AC10 Setup Procedure . . . . . . . . . . . . . . . . . 13
Programmable Threshold Relay . . . . . . . . . . 15
Reset Tare to Zero . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 16
Dimension Drawings
AC10 Tensioncells . . . . . . . . . . . . . . . . . . . . . 18
Model Number Designation. . . . . . . . . . . . . . 18
PSAC10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Warranty . . . . . . . . . . . . . . . . . . . . . Back Page
Introduction
This manual is intended for use by qualified per-
sonnel to assist them in the safe setup and
operation of the Warner Electric AC10 Tension
Measuring System. Warner Electric has made
every effort to insure the accuracy and com-
pleteness of the information and recommends
that all procedures be read and understood
before performing them. Please contact Warner
Electric with any questions regarding any infor-
mation contained in this manual.
Failure to follow these instruc-
tions may result in product damage, equip-
ment damage, and serious or fatal injury to
personnel.