Warner Electric SFP-400 - Manual (Page 2)

2 Warner Electric • 800-825-9050 P-231 • 819-0382
Introduction
The Warner Electric SFP-250 and SFP-400 are
shaft mounted stationary field electromagnetic
clutches. Designed for simplicity, the units are
preburnished at the factory and are ready to
install onto the shaft. Once installed, there is no
need to make any adjustments for wear, and
there are no parts that should need replacing
over the natural life of the clutch. With the
proper alignment already set by the factory and
with no brushes to wear out, the SFP-250 and
SFP-400 are assured for dependable, trouble
free life.
Follow the instructions in this
manual carefully to assure proper installation
and operation. Failure to do so may result in
damage to property and/or injury or even
death to personnel.
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 4
Coil Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warranty . . . . . . . . . . . . . . . . . . . . . . Back Page