Warner Electric CBC-1000 - Manual (Page 14)

12 Warner Electric • 800-825-9050 P-275 • 819-0496
LINE DISPLAY DESCRIPTION OPTIONS DEFAULT
1 b d . Initial Braking Distance - - - - 2 5 The first brake distance used by the
CBC-1000 at power-up.
2 b d . Au E . # of Cycles Averaged 1 - 9 3 The number of cycles used for the running
average of brake distance.
3 c c . Correction Constant - . - - - - 0 . 5000 The scaling factor for the front panel display
(0.5000 for display in pulses).
4 d P . Decimal Point off, .0, .00, .000 oFF Number of decimal places displayed. Affects
all distance values in other registers.
5 F r S t. Front Panel Reset on - off on Enables or disables front reset in the RUN
Mode.
6 P L o c . Front Panel Lock on - off oFF “On” enables and “Off” disables changing
MOV PST, E.W., and BCH PST while running.
7 C r E t . Count Retention on - off on Retains system position during power off.
8 A r S t . AUTO Reset on - off oFF Select Absolute (ON) or Incremental (OFF)
mode of operation.
9 o 1 . Start Output 00.00 to 99.99 00 . 10 The duration (momentary or latched) of the
Start Output in seconds. For latched input,
enter all zeros or press
.
10 o 2 . Early Warning Output 00.00 to 99.99 00 . 10 The duration (momentary or latched) of the
Early Warning output in seconds.
11 o 3 . Brake on Output 00.00 to 99.99 00 . 10 The duration (momentary or latched) of the
Brake On output in seconds.
12 o 4 . Zero Speed Output 00.00 to 99.99 00 . 10 The duration (momentary or latched) of the
Zero Speed output in seconds.
13 o 5 . Zero Speed + Delay 1 00.00 to 99.99 00 . 10 The duration (momentary or latched) of the
Zero Speed + Delay 1 output in seconds.
14 o 6 . Zero Speed + Delay 2 00.00 to 99.99 00 . 10 The duration (momentary or latched) of the
Zero Speed + Delay 2 output in seconds.
15 o 8 . Batch Counter Reset 00.00 to 99.99 LATCH Momentary for automatic (internal) reset or
latched for manual (operator) reset.
16 d 1 . Delay Time 1 00.00 to 99.99 0 . 50 The delay time for Zero Speed + Delay 1
output in seconds.
17 d 2 . Delay Time 2 00.00 to 99.99 1 . 00 The delay time for Zero Speed + Delay 2
output in seconds.
18 0 5 P . Zero Speed Window 01, .05,.10, .25 sec. 10 The time window in seconds to determine
Zero Speed, Zero Speed equals no pulses
received within window.
19 5 Start Command 1-6 - - - - - - Releases latched outputs at the start
Release Outputs command. Press 1-6 on the front panel to
release or drop output.
20 L Move Preset Release 1-6 - - - - - - Releases latched outputs at the move preset.
Outputs Press 1-6 on the front panel to release output
or drop output.
RESET
CLEAR
Programming