Vanguard DMOM-200 - Manual (Page 27)

Operating Procedures DMOM-200™
21
5.10 Computer Interface Procedure
This procedure describes the steps to put the
DMOM-200
 in computer interface.
Table 10.0 Computer Interface Procedures
STEP ACTION DMOM-200  DISPLAY
10-1 Press key #4 (NEXT PAGE) on the
SETUP MENU to display the
COMPUTER CONTROL interface (ITF)
and SET TIME options menu.
10-2 Press key #1 (COMPUTER CONTROL)
to place the DMOM-200
 under an
external PC’s control. PC software
permits DMOM-200
 test record to be
transferred to the PC.
To end the PC control, press the STOP
key, which will restore control to the
keypad and return to the START MENU
display.
5.11 Set Clock Procedures
This procedure describes the steps to set the
DMOM-200
 real time clock.
Table 11.0 Set Clock Procedures
STEP ACTION DMOM-200  DISPLAY
11-1 When key #4 (NEXT PAGE) is pressed on
the SETUP MENU, the COMPUTER
CONTROL interface (ITF) and SET TIME
options menu displays.
11-2 On the first NEXT PAGE menu, press key #2
(SET TIME) to go to steps for setting the
time and date clock.
11-3 Enter month, day, year, hour, minute, and
second for real-time clock. Display will now
return to the START MENU.
This completes the Set Clock procedure.
1. COMPUTER CONTROL
2. SET TIME
COMPUTER ITF MODE
1. COMPUTER CONTROL
2. SET TIME
ENTER
MM-DD-YY HH-MM-SS