Vanguard DMOM-200 - Manual (Page 23)

Operating Procedures DMOM-200™
17
5.7 Restore Record Procedure
This procedure describes the steps to recall a
test record stored in the DMOM-200

Flash memory.
Table 7.0 Restore Record Procedures
STEP ACTION DMOM-200  DISPLAY
7-1 On START MENU, press #2 key (SETUP)
to display the SETUP MENU.
7-2 On SETUP MENU, press #3 key
(RESTORE RECORD) to display menu of
options (Restore Record, Directory, Erase
Record).
7-3 Press #1 key (RESTORE RECORD) to
display menu of restore records options.
7-4 Press key #1 (ENTER RECORD
NUMBER) to display prompt to enter
record number to restore. Press key #2
(SCROLL TO SELECT) and go to step 7-6
for Records Directory display.
7-5 When record number has been keyed in,
press ENTER to restore the selected record.
When the display confirms that the record is
restored (brief display time) display returns
to REVIEW RECORD options menu
(resume procedure at step 7-9 in Table 7.0).
7-6 In the RESTORE RECORD menu, press
key #2 to display a scrolled Records
Directory.
7-7 In the Records Directory, use ∧ and ∨ keys
to scroll through the directory listings of test
records. When the test record of interest
displays, press the ENTER key to display
the record number and the time and date of
the selected test.
1. ENTER ID
2. REVIEW RECORD
3. RESTORE RECORD
4. NEXT PAGE
1. RESTORE RECORD
2. DIRECTORY
3. ERASE RECORD
RESTORE RECORD
1. ENTER RECORD NUMBER
2. SCROLL TO SELECT
RESTORE RECORD
NUMBER:
RECORD RESTORED!
RECORDS DIRECTORY
“UP TO SCROLL FWD
“DWN” TO SCROLL RVS
#1 06/11/01 17:27:00
1710
VIC