Vanguard DMOM-200 - Manual (Page 10)

Operating Procedures DMOM-200™
6
4.2 DMOM-200  Printer Paper
The DMOM-200  printer uses 2.5-inch
wide thermal paper for printing test results.
We recommend that to maintain the highest
quality printing and to avoid paper jamming,
use paper supplied by our factory. Paper
can be ordered from two sources, as follows:
Vanguard Instruments Co, Inc.
1710 Grevillea Court
Ontario, CA 91761
Tel: 909-923-9390
Fax: 909-923-9391
Part Number: TP-3 Paper
OR
BG Instrument Co.
Route 1, Box 258
Mead, WA 99201
Tel: 509-893-9881
Fax: 509-893-9803
Part Number: TP-3 paper
4.3 DMOM-200  Cable Connections
The DMOM-200  is supplied with a 35-
foot test cable set. Each cable consists of a
current-carrying cable and a voltage-sensing
cable. The current-carrying cable is
terminated with a 100-ampere male plug.
The sensing cable is terminated with a 25-
ampere female plug. Insert the current-cable
plugs and voltage-sensing plugs into their
respective control-panel jacks (see Figure
4.0 below). Ensure that voltage plugs
(smaller) are inserted into jacks adjacent to
their companion current jacks (larger).
Figure 4.0 DMOM-200  Cable Connection