Vanguard DMOM-200 - Manual (Page 22)

Operating Procedures DMOM-200™
16
Table 6.0 Review Record Procedure (continued)
STEP ACTION DMOM-200  DISPLAY
6-6 When the record number, with the time and
date of the test, displays and is noted, press
the ENTER key: Display lists full data of the
test, including test number, test current,
burn-in time, and the measured resistance
value.
NOTE
The test record in this example contains 2
tests.
6-7 Press ∧ key to advance to next test. Press ∨
key to return to previous test.
6-8 Press STOP to return to START MENU.
This completes the review record procedure. Display returns to START MENU.
TEST NUMBER: 1
TEST CURRENT: 100A
BURN - IN TIME: 5 Sec
500.3 MICRO-OHMS
TEST NUMBER: 2
TEST CURRENT: 50A
BURN - IN TIME: 5 Sec
500.1 MICRO-OHMS