Vanguard DMOM-200 - Manual (Page 20)

Operating Procedures DMOM-200™
14
Table 5.0 Run Setup Procedure (test-record, site, and equipment identification)
(continued)
STEP ACTION DMOM-200  DISPLAY
5-7 Enter test item’s MODEL using
alpha/numeric keypad. When item’s
MODEL is keyed in, press ENTER to load
keyed data and go to SERIAL NUMBER
identification display.
5-8 Enter test item’s SERIAL NUMBER using
alpha/numeric key pad. When serial number
is keyed in, press ENTER to load keyed-in
data and go to KVA RATING display.
5-9 Enter test items KVA RATING using alpha/
numeric keypad. When KVA RATING is
keyed in, press ENTER to load keyed-in data
and go to OPERATOR identification display.
5-10 Enter test OPERATOR name, using alpha/
numeric keypad. When OPERATOR name is
keyed in, press ENTER to load keyed-in data
and return to START MENU display.
This completes the ENTER ID procedure.
SERIAL NUMBER:
KVA RATING:
OPERATOR:
1. RUN TEST 06/11/01
2. SETUP 12:26:01
3. CAL CHECK