Teledyne LeCroy FlexRay Trigger, Decode and Physical Layer Test - Manual (Page 7)

O PERATOR ’ S M ANUAL
The D Series Software
The D option adds the following capability to the LeCroy oscilloscope software user interface dialogs:
1. Serial Decode If this is the first serial decode
option you have installed on
your scope, an additional set of
Serial Decode and Decode
Setup dialog boxes are provided
for setup of protocol format (as
necessary) and decoding.
2. Decode Protocol Selections FlexRay is one of several signal
types that can be decoded by
the oscilloscope. Other
standards in I
2 C, SPI, UART,
RS-232, CAN and LIN.
FlexRay-TDP-OM-E Rev A
7