Teledyne LeCroy WaveRunner 6 Zi Quick Reference Guide - Manual (Page 6)

923129-00 Rev A
Horizontal and
Vertical Controls
6
Vertical Controls are always “active” for one of the Channels. The coloring on the
descriptor labels indicates “active.” Note that only one channel can be active at a time.
If a channel is active, then it’s corresponding descriptor box is colored. If it is inactive,
then its descriptor box is gray colored.
Press Knob
to toggle between
a zero horizontal
delay and the
previous value.
Quick Zoom
Press to zoom onto
the active channel.
Press again to
unzoom.
Inactive
Vertical controls will not work for these
Active
Vertical controls will work for these.
Press Knob
to toggle between
zero offset and the
previous value.
Math, Zoom, and Memory Indicators
Illuminates when a math, zoom, or memory channel
is active, allowing for the use of the horizontal and
vertical controls.
Light ON
Indicates that
the vertical
controls will
adjust that
channel
(channel is
considered
“active”).
Light OFF
Channel may
or may not be
displayed. Vertical
controls will
not adjust that
channel (channel
is “inactive”).