Teledyne LeCroy WaveMaster 8 Zi_Zi-A - Manual (Page 162)

WaveMaster 8 Zi/Zi-A Oscilloscopes
154 922133-00 Rev A
Color
You can customize the Colors used for Channels, Math, and Memory traces
both when shown on your instrument and when used in print output.
Note: These color settings match a waveform on the grid display (both on-
screen and printed) and show consistently on corresponding dialogs,
tables, and trace descriptor labels.
Numbered sections on this dialog correspond with the following
explanations.
1. Make color selections for Channels (Screen and Print) by touching
one of the color swatches. The Color pop-up control is shown and
may be used to specify your desired color.
2. Just like Channels, make color selections for Math Traces (Screen
and Print) by touching one of the color swatches. The Color pop-up
control is shown and may be used to specify your desired color.
3. Again, just like Channels, make color selections for Memory Traces
(Screen and Print) by touching one of the color swatches. The Color
pop-up control is shown and may be used to specify your desired
color.
4. You can use the Factory default colors button to instantly recall the
original color settings for your instrument.
Note: Print colors are used only when the Colors is set to Print on
the Hardcopy dialog. For convenience, the Preview print colors
button is provided on this portion of the dialog. When the button is
touched, a preview is generated on the grid display area. A
subsequent touch of the button closes the preview.