Audiovox CDM-9100 - Manual (Page 87)

87
Data Communications
Data/Fax Mode (F71)
Your CDM-9100 will work as a wireless modem, if con-
nected to a PC laptop or a computer with the optional
data cable (DIC-9100). When operating in Digital mode,
the phone can be used for Async Data or Fax at the
speed of up to 14.4kbps. Your CDM-9100 also supports
QNC (Quick Network Connection) for faster internet
access. The data/fax features are available while the
indicator is on.
To Receive Data/Fax Call
1. Press F 7
PQRS
1 .
2. Scroll the menu, and press F to select one
of the modes described below.
3. During data/fax calls, you can use only key.
4. To exit from the data/fax mode, press
F
7
PQRS
1 , and scroll to “Off”, then press
F
.
Data: Data mode until the power is turned off.
Fax: Fax mode until the power is turned off.
Data Once: Data mode for one call only.
Fax Once: Fax mode for one call only.
Notes: 1. “Data Once” or “Fax Once” mode will be au-
tomatically reset to “Off” mode after receiv-
ing data/fax once, or in 10 minutes.
2. You cannot receive voice calls in data/fax
modes.
3 For additional details on connecting your
phone to your PC, please refer to instruc-
tions in the DIC-9100 Data Cable Kit.
4. To place data/fax call or access internet
through a PC, it is not necessary to set the
phone in data/fax mode.
OK
Data/Fax
Mode F71
Off
Data