Getting started, Turning the phone on/off, Antenna position – Audiovox CDM-9100 User Manual
Page 24: Receiving signal strength indicator ( ), Battery level indicator, Power management
24
GETTING STARTED
GETTING STARTED
Turning the Phone On/Off
Press and hold
. All the indicators and the display will
light momentarily, and a tone will be heard. The indicator
will be displayed while the phone is turned on.
To turn the phone off, press and hold
.
Antenna Position
The antenna can be used in its fully extended or fully re-
tracted position only. It is recommended that the antenna
should be fully extended for optimum performance and
signal strength or while operating in poor signal areas.
Receiving Signal Strength Indicator (
)
The number of lines indicates the Signal Strength in
your area. Four lines show the maximum level. The dis-
play will vary as you move with the phone. If the signal
is not strong enough to place a call, “
” will appear on
the LCD display.
Battery Level Indicator
You can always monitor the battery charge condition
with the constant battery level indicator. The number of
blocks indicates the battery conditions as follows:
Full charge
Low charge
Flashing indicates discharged.
Power Management
Battery
Lithium Ion
(BTR-9100)
Mode
Digital
Analog
Talk Time
up to
170 min.
60 min.
Standby Time
up to
170 h
15 h
The operating times are approximate values and may
vary depending on network configuration and handset
usage.