Audiovox CDM-9100 - Manual (Page 79)

79
2. The clock alarm does not ring during power
off, but this feature will be activated again
when you turn the power on.
3. The clock alarm may not ring in Auto mode
if you skip the alarm time traveling into an
area with the different local time.
4. See Ringer Volume Control (F31) on page
73 to change the alarm sound volume.
5 In place of the alarm sound, you can use
Vibrating Alert (F8) on page 88.
Countdown Timer (F45)
This feature alerts you when the countdown timer ex-
pires. The timer can be set to 1 through 99 minutes.
To Start the Countdown Timer
1. Press
F
4
GHI
5
JKL
.
2. Enter the duration, 1 to 99
minutes.
3. Press
F
to start. The indicator will be dis-
played.
4. When the timer expires, the
alar m will ring for one
minute with animation.
5. Press any key to stop ring-
ing.
To Cancel the Countdown Timer
1. Press
F
4
GHI
5
JKL
again
after the timer has started.
2. “Count Down Stop?” is dis-
played with the remaining
minutes to expire.
3. Scroll to “Yes” and press
F
to cancel. The
indicator will go out.
Notes: 1. If the timer expires during a call, the alarm
will ring after the call.
2. When you turn the power off, the countdown
timer will be canceled.
3. See Ringer Volume Control (F31) on page
73 to change the alarm sound volume.
4. In place of the alarm sound, you can use
Vibrating Alert (F8) on page 88.
OK
Count Down
Timer F45
00min.
OK
Count Down
Stop?
Yes
No
F45
30min.
Time is UP!