IAI America PS-24 - Manual (Page 5)

1
Safety Precautions for Our Products
The common safety precautions for the use of any of our robots in each operation.
Safety Guide
"Safety Guide" has been written to use the machine safely and so prevent personal injury or property
damage beforehand. Make sure to read it before the operation of this product.
No.
Operation
Description
Precautions
1 Model Selection
● This product has not been planned and designed for the application where
high level of safety is required, so the guarantee of the protection of
human life is impossible. Accordingly, do not use it in any of the following
applications.
1) Medical equipment used to maintain, control or otherwise affect human
life or physical health.
2) Mechanisms and machinery designed for the purpose of moving or
transporting people (For vehicle, railway facility or air navigation facility)
3) Important safety parts of machinery (Safety device, etc.)
● Do not use it in any of the following environments.
1) Location where there is any flammable gas, flammable object or
explosive
2) Place with potential exposure to radiation
3) Location with the ambient temperature or relative humidity exceeding the
specification range
4) Location where radiant heat is added from direct sunlight or other large
heat source
5) Location where condensation occurs due to abrupt temperature changes
6) Location where there is any corrosive gas (sulfuric acid or hydrochloric
acid)
7) Location exposed to significant amount of dust, salt or iron powder
8) Location subject to direct vibration or impact
● Do not use the product outside the specifications. Failure to do so may
considerably shorten its life and cause a product breakdown or facility
operation stop.
2 Transportation
● Consider well so that it is not bumped against anything or dropped during
the transportation.
● Transport it using an appropriate transportation measure.
● Do not step or sit on the package.
● Do not put any heavy thing that can deform the package, on it.
● When using a crane capable of 1t or more of weight, have an operator who
has qualifications for crane operation and sling work.
● When using a crane or equivalent equipments, make sure not to hang a load
that weighs more than the equipment’s capability limit.
● Use a hook that is suitable for the load. Consider the safety factor of the
hook in such factors as shear strength.
● Do not get on the load that is hung on a crane.
● Do not leave a load hung up with a crane.
● Do not stand under the load that is hung up with a crane.