Harrington Hoists and Cranes TNER Theater Hoist - Manual (Page 31)

6.4 Friction Clutch
6.4.1 Friction Clutch – If abnormal operation or slippage occurs do NOT attempt to disassemble or adjust the
Friction Clutch. Replace the worn or malfunctioning Friction Clutch as an assembly with a new, factory
adjusted part.
6.5 Storage
6.5.1 The storage location should be clean and dry.
6.6 Outdoor Installation
6.6.1 For hoist installations that are outdoors, the hoist should be covered when not in use.
6.6.2 Possibility of corrosion on components of the hoist increases for installations where salt air and high
humidity are present. Make frequent and regular inspections of the unit's condition and operation.
31