Gilderfluke&Co Sd-25 Audio Repeaters w/Amplifier - Manual (Page 7)

lect the speed at which the audio ramps in/out.
Option #8: DipSwitch #8: Randomizer. When on,
SoundFiles are played in random order, rather than
sequentially. If less than 255 SoundFiles are loaded
on the Sd-25, then the randomizer checks off each
SoundFile as it is played. It will not play the same
SoundFile a second time until it has played all the
other SoundFile files. If more than 255 SoundFiles
are loaded on to the Sd-25, then the SoundFiles are
played randomly. It does not check to see whether
the same SoundFile has been played recently.
Mode 8 / off/off/off/on/off
Two triggers, with fast access to first SoundFile
Input ʻaʼ plays the first SoundFile ONLY, Input ʻbʼ
plays ALL of the SoundFiles on the Sd-25 (Sound-
Files 1 through ??). This mode is used when you
want to use the ʻbʼ input to trigger all of the Sound-
Files, but occasionally want to play the first Sound-
File an extra time.
Options:
Option #2: The one SoundFile that is selected will
loop as long as the input stays active (only on Firm-
ware version 1.16 or later): unless DipSwitch #6 or
DipSwitch #7 are on.
Option #6: DipSwitch #6: (Firmware version 1.16
or later) When on, the SoundFile will only play once
(no looping).
Option #7: DipSwitch #7: (Firmware version 1.16
or later) When on, input ʻaʼ will loop SoundFile #1 as
long as the input stays active, and input ʻbʼ will loop
through ALL of the SoundFiles on the Sd-25
(SoundFiles 1 through ??) as long as the input stays
active.
Option #8: DipSwitch #8: Randomizer. When on,
SoundFiles are played in random order, rather than
sequentially.
Option #9: DipSwitch #9: Unsteppable. When on,
additional start commands to the Sd-25 will be ig-
nored until the currently playing triggered SoundFile
has completed.
Mode 9 / on/off/off/on/off
Two triggers, with fast and exclusive access to first
SoundFile
Like Mode 8, except the B input plays SoundFiles 2
through ?? instead of ʻAllʼ the SoundFiles. This
mode is used when you need a method of triggering
an emergency or other ʻspecialʼ announcement.
Options:
Option #2: The one SoundFile that is selected will
loop as long as the input stays active (only on Firm-
ware version 1.16 or later): unless DipSwitch #6 or
DipSwitch #7 are on.
Option #6: DipSwitch #6: (Firmware version 1.16
or later) When on, the SoundFile will only play once
(no looping).
Option #7: DipSwitch #7: (Firmware version 1.16
or later) When on, input ʻaʼ will loop SoundFile #1 as
long as the input stays active, and input ʻbʼ will loop
through SoundFiles 2 through ?? as long as the in-
put stays active.
Option #8: DipSwitch #8: Randomizer. When on,
SoundFiles are played in random order, rather than
sequentially.
Option #9: DipSwitch #9: Unsteppable. When on,
additional start commands to the Sd-25 will be ig-
nored until the currently playing triggered SoundFile
has completed.
Mode A / off/on/off/on/off
Trigger+reshuffle and a second trigger
Similar to Mode 8, except that input ʻaʼ plays the first
SoundFile ONLY and also ʻreshufflesʼ the ʻPlayListʼ
triggered by the ʻbʼ input. Input ʻbʼ plays ALL of the
SoundFiles on the Sd-25 (SoundFiles 1 through ??).
Options:
Option #2: The one SoundFile that is selected will
loop as long as the input stays active (only on Firm-
ware version 1.16 or later): unless DipSwitch #6 or
DipSwitch #7 are on.
Option #6: DipSwitch #6: (Firmware version 1.16
or later) When on, the SoundFile will only play once
(no looping).
Option #7: DipSwitch #7: (Firmware version 1.16
or later) When on, input ʻaʼ will loop SoundFile #1 as
long as the input stays active, and input ʻbʼ will loop
through ALL of the SoundFiles on the Sd-25
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
page 7 of 16 • © February 11, 2014 Gilderfluke & Co. DCM