Ec declaration of conformity – Gilderfluke&Co Sd-25 Audio Repeaters w/Amplifier User Manual

Page 16

FCC and CE Compliance:

Sd-25s which are revision 1.6 or later have been tested to comply with
FCC and CE requirements. Revisions earlier than this may have passed
testing, but were not certified at the time of manufacture.

Because Sd-25s are low voltage DC devices, neither UL or CE require
safety testing.

For fireproofing or additional radio frequency interference shielding, Sd-25s
can be mounted in a fire rated metallic case. Typically, this would be a
NEMA-rated electrical enclosure or 19” electrical rack.

FCC Instruction to User:

This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radi-
ate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been verified to comply with the limits for a class B
computing device, pursuant to FCC Rules. In order to maintain compliance
with FCC regulations, shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to
result in interference to radio and TV reception. The user is cautioned that
changes and modifications made to the equipment without the approval of
manufacturer could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions: (1) This device
may not cause harmful interference and (2) this device must
accept any interference received, including interference that
may cause undesired operation.

This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.

Cet appareil numerique de la classe B respecte
toutes les exigences du Reglement sur le
materiel brouilleur du Canada.

EC DECLARATION OF CONFORMITY

Tuesday, February 11, 2014

Application of Council Directives:

EMC Directive, 89/336/EEC

Manufacturer's Name:

Gilderfluke & Co., Inc.

Manufacturer’s Address:

205 South Flower St., Burbank, California 91502 USA

Importer’s Name:

Importer’s Address:

Type of Equipment:

Professional Audio

Equipment Class:

Commercial and Light Industrial

Model:

Sd-25

Conforms to the following Standards:

EN 55103-1: 1996 and EN 55103-2: 1996

Year of Manufacture:

2006

I the undersigned, hereby declare that the equipment specified above conforms to the above directive(s) and standard(s).

Place: Burbank, California

Signature:

(signed)

Date: August 1, 2006

Full Name:

Doug Mobley

Position:

CEO

Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485