Sonnet Technologies eSATA Extender Cable - Manual (Page 16)

Figure 43
hard drive carrier
1
EARLY 2008 MAC PRO INSTALLATION
8. Carefully insert the hard drive carriers back into the
drive bays, making sure any attached drives are plugged
in securely
(Figure 43).
9. Lift the Mac Pro back into the upright position, and
then insert the side panel back into place.
10. While supporting the side panel, press down on the
locking latch to secure the panel in place .
11. Reconnect your computer and turn it on to verify
everything is working properly. If everything works
properly, your installation is complete.