SKC Limited AirChek 3000 Deluxe Pump Operating Instructions - Manual (Page 32)

Page 30 210-3311M Issue E www.skcltd.com
User Interface Level Two
7. Alternatively to exit the User Interface without saving the changes, press the
button until the ‘ESC’ screen is displayed. Press [ ] to switch to HOLD mode
without saving the changes.
2) Setting the Clock Time
1. On the pump enter User Interface Level Two as detailed in Getting Started 7) on page 19.
2. Press the button until the 12/24 hour clock setting screen is displayed.
3. Use the and buttons to toggle between the 12 hour and 24 hour clock
options.
Note: This screen also provides access to the delayed start time option - refer to
User Interface Level Two 5) on page 34.
4. Press the button until the clock time setting screen is displayed with ‘ SET’ and
the current clock hours value flashing.
5. Use the and buttons to enter the correct clock hours.