User interface level two – SKC Limited AirChek 3000 Deluxe Pump Operating Instructions User Manual
Page 31

www.skcltd.com
210-3311M Issue E
Page 29
User Interface Level Two
1) Changing the Display Units
1. On the pump enter User Interface Level Two as detailed in Getting Started 7) on page 19.
2. Press the button until the temperature units setting screen is displayed with
‘
SET’ and the current display units flashing. The display shows the current air
temperature.
3. Use the and buttons to toggle between the ‘
°F’ and ‘°C’ temperature units
options.
4. Press the button until the atmospheric pressure units setting screen is
displayed with ‘
SET’ and the current display units flashing. The display shows the
current atmospheric pressure.
5. Use the and buttons to toggle between the ‘
ins’ (“ H
g
), ‘
m’ (mbar) and ‘mm’
(mm H
g
) atmospheric pressure units options.
6. To save the new display units settings, press the button until the ‘End’ screen
is displayed. Press [
] to save the settings and switch to HOLD mode.