SecurityMan Cyber Eye - Manual (Page 47)

CyberEyes User’s Manual Rev.1 45
Ÿ Motion Detection
The Motion Detection function allows you to set desired areas for motion detection, as well as to set motion
sensitivity and motion detection control parameters.
Ÿ Image Compression Quality
The Image Compression Quality function allows you to set different image compression to yield different
recording video quality. The more compression quality you set, the more disk space consumed, and better the
recording image quality. The default value is 75. Click and drag the slide bar or click the up and down buttons
in the box to set the desired compression quality. Click Set Default to return to the default value.
Ÿ Maximum FPS
The Maximum FPS function allows you to manually adjust the maximum recording frame rate per second
CyberEyes could process. Some frames will be dropped (or lost) if the frame rate per second of the input video
is above this value. For example, if you set the Maximum FPS value to 5, then CyberEyes will record 5 frames
per second and drop or lose other 10 frames even though it is capable of recording up to 15 frames per second.
Click and drag the slide bar or click the up and down buttons in the box to set the number of frames the channel
could process per second. Note: Even if you set the Maximum FPS value to 30, CyberEyes is still going
to record at maximum of up to 15 frames per second.
The minimum value is 0 while the maximum
value is 100.