SecurityMan DigiairWatch Series User Manual

Page 33

• • Removing Cameras

To remove a camera from your system, simply highlight the selected
camera to be removed and press the

OK button on the receiver.

Once selected, a confirmation screen will pop up asking you to
confirm (

YES) or cancel (NO) your selection, use the LF and RT

buttons to make your selection and press the

OK button to confirm.

• Refresh Rate

Refresh Rate is a video filter that reduces flickering effects in the
interlaced video and eliminates flash caused by fluorescent lights.
Use the

Up, Down, LF, and RT buttons to make your selection and

press the

OK button to save your changes. Options include 50 / 60Hz

selectable. The default is set to 60Hz which are commonly used in the
United States, please check your local listing to use the right Hertz.