SecurityMan DigiairWatch Series - Manual (Page 12)

Receiver
TV
8
Quick Start
1. Mount your camera(s) in the desired position. Make sure to plug in the
power (5VDC, 1.0A) and attach the supplied antenna(s).
CAUTION: To prevent electric shock or damage to the camera,
please make sure to properly insolate the camera’s power
connections if being used as an outdoor application.
2. Plug in the receivers power supply (12VDC, 1.0A) and connect the AV
(audio/video) cable from the AV output of the DVR/Receiver to your
TV’s AV input.
NOTE: Make sure all cords are connected, tight and that you are following
the proper color coding (Video to Yellow, Audio to White and Red)
NOTE: For best results, please do a quick reception
quality test before mounting your camera(s).