SecurityMan DigiairWatch Series - Manual (Page 31)

27
• Auto Scan
Auto Scan is used to set up an automatic camera rotation period
between cameras 1-4 (when applicable). To do so, simply highlight
and press
OK on Auto Scan. Use the Up and Down buttons to make
your selection and press the OK button to save your changes. Options
include: Never (default), 5 seconds, 10 seconds, 15 seconds, and 20
seconds.
NOTE: You can manually toggle between cameras 1-4 by pressing the
Camera button on the receiver. During “single channel live view”, the
DVR will not toggle if the user is utilizing the manual recording feature
and will only record the current camera being displayed during
motion detection recording.
• Add/Remove Camera
The Add/Remove Camera option is used to add/remove cameras to
or from your DVR/Receiver. Camera 1 – 4 shown in the image below
represent all the channels available on your system (a
LOCK symbol
represents a camera that is already registered to that channel and
an
UNLOCK symbol represents an available channel that is free). To
access these options simply highlight and push the OK button on the
Add/Remove Camera option.
NOTE: By default the camera(s) that come with your DigiairWatch kit
are paired/registered in sequence from Camera 1 ~ 4.