SecurityMan DigiAir-SD User Manual
Page 22
In
Video Record press the UP and DOWN button to make a selection between VIDEO (default)
or
PHOTO, then press OK to save the setting and exit Video Record or press the MENU button
to exit without saving. When
VIDEO is selected, the recorder will record video in AVI file format
under MPEG4 (86~89MB for a 10 min. file) compression. On the other hand if
PHOTO is
selected the recorder will take JPEG (27~30KB/picture) snapshot picture. Both
VIDEO and
PHOTO recording is suitable for motion detection recording, schedule recording, and manual
recording.To Manual record make sure to change the live display view to a single camera display
view and then press the
REC button at any time to initiate manual recording.
Note: Manual recording will not be operable under QUAD screen display view, please
change the live display view to Single channel view for Manual recording.
When the
Date/Time Stamp is enabled, the system will display the date and time to real-time
monitoring and the recorded video/photo files. Press the
UP and DOWN button to make
a selection between ON (default) or
OFF, then press OK to save the setting and exit Date/Time
Stamp or press the MENU button to exit without saving.
Overwrite
In the
Record Setting highlight and press the OK button on Overwrite as shown below.
When the record
Overwrite function is ON (default), the receiver will automatically start to
overwrite when the storage media is equal to or less than 130MB of available
Free Space. If
record
Overwrite is OFF, the receiver will stop recording when the storage media is full. Press
the
UP and DOWN button to make a selection between ON or OFF, then press OK to save the s
etting and exit
Overwrite or press the MENU button to exit without saving.
Video Record
In the
Record Setting highlight and press the OK button on Video Record as shown below.
19