SecurityMan DigiAir-SD - Manual (Page 19)

A message “ Restore default, are you sure?” will appear in red color, press the UP or DOWN buttons
to select YES or NO (default) to proceed with system restore. If YES is selected the recorder will
default all the setting back to the original factory default setting, otherwise press the MENU at any time
to exit out of Default without restoring factory default setting.
Note: Please double check and jot down current system setting before running the system
Default Setting.
Version
In the System Setting highlight and press the OK button on System Info as shown below.
System Info displays the current version of the software used for both the recorder and the camera(s).
16
Record Setting
From the Menu Setup window, select Record Setting as illustrated below. Press the UP, DOWN,
LEFT, RIGHT buttons to browse through the setup menu. The selected icon will turn blue and a
descriptive text to the corresponding function will appear in the top of the screen. Press the OK
button to confirm selection.
Default Setting
System Info
Date/Time Stamp
Video Setting
Motion Record Time
Video Record
Schedule Record
Record Setting