SecurityMan DigiAir-SD - Manual (Page 15)

Signal Intensity
The Signal Intensity shows the signal strength between the transmitter and the receiver. The more
bars, the better the transmission signal image.
Resolution
Select between VGA and QVGA resolution quality to display and record videos and take snapshots.
Higher resolution VGA will display and record up to 11 frames per second and the lower resolution
QVGA will display and record up to 30 frames per second. The third option is the ZOOM; ZOOM is
QVGA resolution which magnifies the image or zooms in.
Record
The •REC icon will appear in the top center of the user’s interface during video recording. In normal
state where the receiver is not in record mode, the •REC icon will not show.
File Name
At the same time when the Record icon appears to record a video/picture file, File Name will at the
same time displayed during recording. File Name is automatically generated by the system and
cannot be alter or change.
Motion Detection
The Motion Detection icon is in the shape and form of an eye located on the top center of the
user’s interface. When motion detection is active or turn ON the Motion Detection icon will
appear. Normal state the Motion Detection icon will not show. To activate Motion Detection,
press the OK button.
Video/Picture Mode
The recording feature can be setup in the menu to record Video files or record Picture files, the
selected Video or Picture icon will display on the user’s interface. A Video icon indicates that
video recording is enabled and a Camera icon indicates that picture recording is enabled.
Video recording length is optional in the menu setup where picture recording is fixed.
Manual/Auto Sequence
The Manual/Auto Sequence is represented by the letter M and the letter A. The letter M refers
to Manual loop, which indicates that the user can manually toggle between camera1 to camera4
by pressing the CAM button on the receiver. The letter A refers to Automatic loop, which
indicates that the system will toggle automatically between camera1 – camera4 in sequential
order. The sequential dwell time is optional in the menu setup.
Camera
Cam1, Cam2, Cam3, or Cam4 displays depending on the camera is selected to monitor, if Cam1
needs to be monitor, toggle to Cam1 using the CAM button. Or, simply press the QUAD button to view
the cameras in a quad split screen, press the QUAD button again to exit out of quad screen display.
Date/Time
The Date/Time displays the system date and time located at the bottom left corner of the user’s
interface. Date/Time can be setup in the menu option.
Free Space
Free Space is the total space available in the SD memory card for recording. When the recorder is
recording, the amount Free Space value should decrease accordingly.
12