SecurityMan DigiAir-SD - Manual (Page 12)

receiver
1. Attached the included antenna to the back of the receiver and then find a suitable location for the
DigiAir-SD wireless receiver/recorder.
2. Mount the camera in the desired position. Be sure to plug in the power to the camera and attach
the supplied antenna to the back of the camera.
3. Connect the AV (audio/video) cable from the AV output of the receiver to a monitor or other recorder
for backup purposes. (ie. CCTV monitor, LCD monitor, TV, DVR, recorder, & etc). Turn on the
monitor and change the channel on the monitor to AV input (ie. LINE1, LINE2, VIDEO1, VIDEO2,
& etc.), as illustrated below.
4. Plug one end of the AC adapter to DigiAir-SD receiver (DC in) and the other end into an electrical
outlet, as shown below.
5. Insert an SD card (not included) into the SD card slot located on the rear of the receiver and then
switch the main power switch to the ON position as illustrated below.
Quick Start
9
Input
or
AV Output to
TV/DVR/VCR