SecurityMan DigiAir-SD - Manual (Page 18)

SD Format
Camera Rotation
In the System Setting highlight and press the OK button on the Camera Rotation as shown below.
The Auto Sequence is use to setup the camera sequential rotation period between cameras. The
default Auto Sequence is set to OFF. To change the value, press the UP or DOWN buttons to toggle
between OFF, 5 sec, 10 sec, 15 sec, 25 sec, or 30 sec. Press OK to save and exit out of Auto
Sequence or press the MENU button to exit without changes. If a time value is selected, there will
be an “A” icon showing on the upper right of the screen to indicate that the Auto Sequence is on.
Note: Auto Sequence will still display pitch black image even if the camera is not present when
the camera is checked.
SD Format
In the System Setting highlight and press the OK button on SD Format as shown below.
A message stating “ Format will erase all data, continue?” will appear in red, press the UP or DOWN
buttons to select YES or NO (default) accordingly to proceed with the SD (Secure Digital) formatting
options. If YES is selected the entire SD card will be formatted and everything inside will be erase and
cannot be retrieve. Highlight YES and press OK at anytime to proceed with formatting the SD card or
press MENU to exit without formatting.
NOTE: Please remember to backup all the important data (Video/Picture) first, before attempting
to format. ALL DATA WILL BE LOST.
Default Setting
In the System Setting highlight and press the OK button on System Reset as shown below.
Auto Sequence
15
Sequential Setting