Robertshaw 9720i - Manual (Page 5)

How do I turn on the heating or cooling cycles?
From the main screen press MENU.
Use the UP or DOWN arrows to highlight HEAT/COOL.
Press SELECT.
Use the UP or DOWN arrows to highlight HEAT, COOL
or AUTO CHANGEOVER. Press SELECT. The
SELECT button will turn on (or off) the desired cycle.
You do not have to turn off HEAT to turn on COOL.
When HEAT or COOL or AUTO is turned on, all others
are automatically shut off. After pressing the SELECT
button, the main screen will automatically appear.
NOTE: EMERGENCY HEAT is used only on the 9720i model.
AUTO CHANGEOVER appears only if Auto Changeover is turned on in the
Installer Settings.
5
MONDAY 3:29 PM
78.1
HOLD TEMP MENU
COOL
FAN AUTO
SET AT
78
OUTSIDE 24°F
MENU
DAY / TIME
HEAT / COOL
PROGRAM
FAN
HOME SELECT
HEAT / COOL SETTINGS
MAIN MENU SELECT
OFF
HEAT
COOL
AUTO CHANGEOVER
HEAT / COOL SETTINGS
MAIN MENU SELECT
HEAT
COOL
AUTO CHANGEOVER
EMERGENCY HEAT
110-1023E.qxd 11/18/04 10:50 AM Page 5