Robertshaw 9720i - Manual (Page 22)

22
INSTALLER settings (continued)
CONTACT INFORMATION
This allows the servicing HVAC contractor to put their name and phone number into the thermostat to
remind you when service may be required.
SERVICE MONITOR MENU
Two menus are available, the System Monitor and the Filter Monitor. Both can be set based on the HVAC
system run time or calendar based. See Reminder Interval.
Both the System Monitor and Filter Monitor can be set from OFF to 360 Days in 30 day increments or
OFF to 980 in 20 hour increments.
REMINDER INTERVAL
The Reminder Interval can be set for either HVAC system run time or based on the calendar.
If Run Time is chosen, the service reminder will be set in hours. After the HVAC system has been
operating for the selected number of hours, a Service Reminder will be displayed informing you that
service is suggested for your system.
If Calendar Time is chosen, the service reminders will be set in days. After the selected number of
days has passed, a Service Reminder will be displayed informing you that service is suggested for
your system.
CONTACT INFORMATION
AIR EXPERTS
BACK EDIT
1-555-555-1212
INSTALL MENU SELECT
SERVICE MONITOR MENU
SYSTEM MONITOR 980
FILTER MONITOR 980
REMINDER PERIOD
RUN TIME
CALENDAR TIME
INSTALL MENU SELECT
110-1023E.qxd 11/18/04 10:50 AM Page 22