Robertshaw 9720i - Manual (Page 19)

What are the INSTALLER settings?
The INSTALLER SETTINGS are set up during the initial installation. They tell the thermostat how to function with your heating or
cooling equipment. The following is a brief overview and discussion of these settings.
SYSTEM SETUP
Choose the system component which the thermostat will control.
This screen appears only on models 9700i and 9701i.
1st STAGE HEATING
The 9701i and the 9715i can have a gas/oil or electric first stage heating.
Choose the energy source for 1st stage heating.
19
INSTALL MENU SELECT
1ST STAGE HEATING
GAS / OIL
ELECTRIC
HOME SELECT
INSTALLER SETTINGS INSTALLER SETTINGS INSTALLER SETTINGS
HOME MAIN MENU SELECT SELECT
SYSTEM SETUP GAS
RESIDUAL COOL 60
AUTO CHANGEOVER OFF
EER ON
DEADBAND 3˚F
SECURITY OFF
CONTACT INFO
SERVICE INT
CONTACT INFO
SERVICE INT
REMINDER
RUN
TEMP OFFSET 0.0°F
INSTALL MENU SELECT
SYSTEM SETUP
FURNACE
HEAT PUMP
110-1023E.qxd 11/18/04 10:50 AM Page 19