Tree – Rivers Edge RE602 JOURNEYMAN User Manual
Page 46
Check for parts online at
www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
Check for parts online at
www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
46
Operator's Manual
Rivers Edge One-Man Ladder Stands
3. With two people securely holding the ladder, use the three point contact
climbing method to slowly climb the ladder and carefully keep a constant
hand grip on the ladder at all times. Always lean forward, toward tree, to
keep top section tree blades against the tree. Be certain ladder bottom
is firmly seated on dry, level ground. Attach your harness tether to
the tree before securing the platform to the tree and stepping onto
platform. Refer to the full Body harness instructions included with
this product.
4. Standing on ladder step, lean toward tree with ratchet strap now in hand,
hook "S" hook with long strap through hole provided on tree blade. Feed
the long strap through the center (slot) of ratcheting mechanism and back
around through tightening lever. SEE fIGuRES 2 and 3.
notE: be sure you feed the long strap correctly so there are no twists in
the strap.
Wrap entire ratchet assembly around tree and hook other "S" hook through
opposite tree blade hole. Pull tail of long strap until most of the slack is
taken out. Be sure entire strap is even and at the same level all around tree.
"Ratchet" tight to tree, this will securely attach ladder to tree and prevent
movement. SEE fIGuRES 2 and 4.
notE: to release ratchet, simply pull the release lever and open tightening
lever wide open (flat).
5. If applicable, attach backrest portion of seat to tree by wrapping the long
strap with buckle end around tree and snapping together with opposite
end. Adjust as needed.
6. If applicable, once seated the shooting rail can now be seated down over
studs of armrest mounts. SEE fINIShED lADDER IMAGES.
7. Reverse setup & use instructions to take ladder down.
Figure 2
pull tail to take out slack
tightening lever
release lever
feed through slot
TREE
ratchet
back and
forth
Figure 3
Figure 4