Rivers Edge RE602 JOURNEYMAN - Manual (Page 25)

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 25
Operator's Manual
Rivers Edge One-Man Ladder Stands
6. Attach the stabilizer bar (L17) to the second ladder section mounting bracket
using (1) provided spring lock pin. Spring lock pin must be put in appropriate
hole to achieve desired distance from tree. Adjustment in length may be
needed when ladder is uprighted later in instructions. SEE fIGuRE 4.
7. a. Tie one end of the provided 9’ rope to the link welded onto the
stabilizer bar, just in front of the tree hugger. Be sure your double knot
is secure. SEE fIGuRE 5.
b. Tie one end of each of the provided 15’ tie-off ropes to the square tube
side rails, just in front of the welded on tree blades. Be sure your double
knots are secure. SEE fIGuRE 5.
Figure 4
stabilizer bar
spring lock pin
Figure 5
fINIShED 15’ JOuRNEYMAN lADDER
top section
third section
second section
bottom
section
spring lock pins
stabilizer bar
9' stabilizer
bar rope
15' tie-off ropes
ratchet strap