RECON 264146 RAM Cab Light (Dodge) - Manual (Page 5)

5 | P a g e
Remove Door Pillar & Seat Belt Bolt
-With Flat Head Screwdriver Pop Off Caps on Rear Grab handle - Driver & Passenger
-Remove (2) 10mm Bolts On Each Sides Grab Handle
-With Flat Head Screwdriver Unclip Upper Seat Belt Cover and Remove T50 Torx Bolt (Will Need
Encouragement)
-Removed Handle From Pillar - Remove Pillar by Pulling Edges Out Of Door Trim Groves - Pillar and
Handle Now Can Be Removed
At This Point Your Headliner Will Now Be Pulled Down To A Workable Depth