RECON 264146 RAM Cab Light (Dodge) - Manual (Page 13)

13 | P a g e
-Connect Each Recon To The Power Wire First
-Push The Power Wire Through Roof, and Pull The Ground Wire Up and Connect.
-Push The Ground Wire Back Through Roof
VERY IMPORTANT STEP!: Sealing And Securing Your Recons
-
Using Waterproof Silicone or RTV, Goop Each of The 15 Holes With a Liberal Amount of Goop
- With The Recon Seated, Use The Supplied Screws and Washers - Use The 1/8 Pre Drilled Holes To
Secure It To Your Roof DO NOT OVER TIGHTEN! Slowly Screw In Recon Lights Until A Firm Seal Is
Created.