RECON 264146 RAM Cab Light (Dodge) - Manual (Page 2)

2 | P a g e
Tools Required:
A Good Assortment of Hand Tools is Recommended, Required Hand tools are as
Followed:
• Wet Erase Marker
• Cordless Drill
• 2 Drill Bit Sizes - 1/8" and 1/4 (or 3/8")
• Phillips Bit
• Wire Strippers & Crimper's
• DC Voltage Meter
• Tape Measures & Ruler (Straight Edge)
• Screw Drivers Phillips & Flat Head (Small Flat Head)
• 10mm Socket (Deep well Preferred)
• T20 Torx & T50 Torx
• Electrical Tape
• Stranded LV Wire (Spec'd At Least At 20 Amp)
• Choice of Connectors +/- Soldering Tools
• Step Ladder (x2 If Possible)