RECON 264146 RAM Cab Light (Dodge) - Manual (Page 3)

3 | P a g e
On To The Tear Down.
It Is Not Required, but Disconnecting Your Batteries Negative Cable Is Recommended
Start by Removing the Front Driver and Passenger Pillars.
-On The Grab Handle Use The Small Flat Head Screw Driver To Pop Open The Caps
-Use The 10 mm Socket The Remove The (2) Bolts on The Driver & Passenger Side
-With The Bolts Out, Pull On The Handle -The Clips Will Unclip - The Pillar Then Can Be Removed
Remove The Driver and Passenger Visors
-Unclip The Visor, On the Hinge Side of The Visors Remove The (3) T20 Torx Bolts on Each Side
-With The Bolts Out, Pull Down On The Visor Until It Unclips - The Visor Then Can Be Removed.
-The Stationary Visor Clips Will Not Be Detached From The Headliner, They Simply Pull Down and Unclip
From the Roofs Structure