Ransburg Test Stand RMA-303, EVOLVER, EVOLVER NE - Manual (Page 4)

LN-9259-07.1
SAFETY
Before operating, maintaining or servicing any
Ransburg electrostatic coating system, read and
understand all of the technical and safety litera-
ture for your Ransburg products. This manual
contains information that is important for you to
know and understand. This information relates to
USER SAFETY and PREVENTING EQUIPMENT
PROBLEMS. To help you recognize this informa-
tion, we use the following symbols. Please pay
particular attention to these sections.
A WARNING! states information to alert you to a
situation that might cause serious injury if instruc-
tions are not followed.
A CAUTION! states information that tells how to
prevent damage to equipment or how to avoid a
situation that might cause minor injury.
A NOTE is information relevant to the procedure
in progress.
While this manual lists standard specifications
and service procedures, some minor deviations
may be found between this literature and your
equipment. Differences in local codes and plant
requirements, material delivery requirements,
etc., make such variations inevitable. Compare
this manual with your system installation drawings
and appropriate Ransburg equipment manuals to
reconcile such differences.
Careful study and continued use of this manual
will provide a better understanding of the equip-
ment and process, resulting in more efficient
operation, longer trouble-free service and faster,
easier troubleshooting. If you do not have the
manuals and safety literature for your Ransburg
system, contact your local Ransburg representa-
tive or Ransburg.
SAFETY PRECAUTIONS
> The user MUST read and be familiar with
the Safety Section in this manual and the
Ransburg safety literature therein identified.
> This manual MUST be read and thoroughly
understood by ALL personnel who operate,
clean or maintain this equipment! Special
care should be taken to ensure that the
WARNINGS and safety requirements for
operating and servicing the equipment are
followed. The user should be aware of and
adhere to ALL local building and fire codes
and ordinances as well as NFPA-33 SAFETY
STANDARD, prior to installing, operating,
and/or servicing this equipment.
W A R N I N G
> The hazards shown on the following page
may occur during the normal use of this
equipment. Please read the hazard chart
beginning on page 3.
W A R N I N G
Test Stations - Safety
1