beautypg.com

Ransburg Test Stand RMA-303, EVOLVER, EVOLVER NE User Manual

Page 22

background image

LN-9259-07.1

Test Stations - Operation

19

NOTES

5. Turn on the “Applicator Trigger”.

6. Let the water flow freely through the spray head

until there is no air in the line.

7. Shut off the paint trigger.

8. Turn off “Pressure Pot” valve. Turn the Water/

Air” switch to the “Air” position.

9. Turn on the “Applicator” switch and the “Dump

Trigger” switch until all traces of water are re-

moved from the dump line.

10. Turn off “Paint Air Enable” switch to release

air through the applicator.

11. Turn off all switches and remove the applicator.