Hauler Racks Hauler II - UNIVERSAL TRUCK SERIES RACKS - Manual (Page 3)

1. (Continued) Connect front and rear sections
Note the orientation of the other carriage bolts on rail assemblies.
For the top round tube, use a 3/8”-16 x 1-3/4” carriage bolt, 3/8” split lock washer and a 3/8”-16 nut,
install hardware finger tight. Repeat for other side rail.
For the lower rectangle tube, use (2) 3/8”-16 x 3” carriage bolts, (2) 3/8” split lock washers and (2) 3/8”-
16 nuts, install hardware finger tight. Repeat for other side rail.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 3 of 14 WWW.HAULERRACKS.COM