Hauler Racks Hauler II - UNIVERSAL TRUCK SERIES RACKS - Manual (Page 2)

1. Connect front and rear sections
Each side rail side contains a front and rear section preassembled for easier assembly. The front and
rear sections are banded together.
Remove the banding and separate the front and rear rail sections from packaging.
On a flat surface, place boards under the front and rear rail sections as shown so that the rear ‘H’
bracket does not touch the ground. This will make aligning the front and rear rail sections faster.
Insert the front rail section into the 5” bracket mounted on the rear rail section and line up the holes.
NOTE: If you have a 97-09 Chevrolet or GMC fullsize truck, you will need to change the feet with p/n
SPBKIT-1 due to possible stake pockets interference.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 2 of 14 WWW.HAULERRACKS.COM