Hauler Racks Hauler II - UNIVERSAL TRUCK SERIES RACKS - Manual (Page 11)

9. Drill and attach middle crossbar / leg assembly
Turn the rack upright and place the rack on the vehicle.
The rear legs should be positioned as far back on the bed edge as possible. Avoid placing attachment
bolt holes in brackets over stake pockets. Check to make sure the tailgate can open and close properly.
Temporarily clamp the rear legs in place (optional but suggested).
Slide the front legs with middle crossbar assembly as close to the front edge of the truck bed as possible,
again avoiding stake pockets.
Ensure the entire rack and legs are square to the bed and vehicle. Adjust if needed.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 11 of 14 WWW.HAULERRACKS.COM