Hauler Racks Universal Steel Van Rack (SV2-1) - Manual

1 of 7
HAULER RACKS, INC.
7109 31
st Avenue North
Minneapolis, MN 55427-2848
WWW.HAULERRACKS.COM
Toll Free: 1-800-843-5445
Phone: 763-546-5620
Fax: 763-546-0933
PRORAC CONTRACTOR SERIES
UNIVERSIAL STEEL VAN RACK
INSTALLATION INSTRUCTIONS
600 Lb. Capacity
Package Contents:
Parts
Hardware
(4) Outer Crossbars (4) 5/16”-18 x 1-1/2” Carriage Bolts (8) 3/8”-16 x 2-1/2” Hex Head Bolts
(2) Inner Crossbars (4) 5/16”-18 x 1” Carriage Bolts (24) Flat Washers
(4) Uprights (8) 5/16” Flat Washers (12) 3/8”-16 Nylon Insert Locknuts
(4) Clips (8) 5/16”-18 Nylon Insert Locknuts (1) Tube of Silicone
(4) End caps
Before you begin:
Do not carry more than 600 pounds (272KG) of combined cargo and accessories on ProRac crossbars. Distribute loads evenly across both
crossbar. ProRac cannot warranty loads that exceed this limit.
ProRac crossbars do not increase gutter or roof strength. Consult vehicle manufacture for gutter load capacity.
Remove all components from the shipping carton and read the instructions thoroughly to familiarize yourself with the assembly sequence.
Gather the following tools used to assemble and install the rack.
1/2” & 9/16” Socket and open end wrench
3/8” dia drill bit and drill
Marker