Hauler Racks Hauler II - UNIVERSAL TRUCK SERIES RACKS - Manual (Page 10)

8. Install HD braces
Remove the 3/8”-16 nuts and 3/8” split lock washers from the floating 3/8” bolts in the legs and crossbar.
Loosely attach the HD brace to the leg using one of the previously removed 3/8” split lock washers and
3/8”-16 nuts.
Slide the HD brace along the leg to the crossbar.
Align the floating bolt in the crossbar so that the floating bolt goes though the open hole on the HD
brace.
Continue to slide HD brace to the crossbar.
Install 3/8” split lock washer and 3/8-16 nut. Finger tighten the two nuts. Repeat for other corners.
It is normal if the flat ends of the HD braces do not to sit flush with the legs and crossbar at this time.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 10 of 14 WWW.HAULERRACKS.COM