Darex XT-3000A - Manual (Page 19)

17
the closing screw exits the knob assembly.
8. The chuck knob assembly does not come
apart from this point.
TO REASSEMBLE:
Reassemble in reverse order.
CHUCK DESCRIPTIONS AND PART #’S
SA16400TA - 3-12 mm Standard Chuck
SA16450TA - 12-21mm Standard Chuck
SA16500TA - 21-30mm Large Drill Chuck
SA16975TA - 3-12mm Step Drill Chuck
SA16980TA - 12-21mm Step Drill Chuck
SA16890TA - 3-12mm 90° Chuck
SA16880TA - 12-21mm 90° Chuck
SA16916TA - 3-12mm Brad Point Chuck
SA16918TA - 12-21mm Brad Point Chuck
SA16484TA - 3-12mm Left Hand Chuck
SA16488TA - 12-21mm Left Hand Chuck
SA16401TA - 1.5-7mm 1.5-7mm Chuck
SA17010TA - 3-12mm Auto Geared Chuck 3-12mm
SA17025TA - 12-21mm Auto Geared Chuck 12-21mm
Chuck Information
5. Rotate chuck knob
counter clockwise
until the wrench
reaches the top of
the slot.
6. Remove wrench and
reinsert into the set
screw hole above the
slot.
7. Rotate the chuck knob counterclockwise until